Sony Sbh20 Windows Driver

Pairing is the process required to create a link between BLUETOOTH devices to allow wireless connection. You must pair a device with the headset to be able to make a BLUETOOTH connection for the first time. Before you start pairing operation, make sure that: • Your computer has a BLUETOOTH function that supports music playback connections (A2DP).

Improves the performance in USB-B/USB micro B function. Sony Audio driver is a program to improve the performance in USB-B/USB micro B function.

• The computer is placed within 1 m(3 feet) of the headset. • The headset is charged sufficiently. • The operating instructions of the computer is on hand. • Depending on the computer, the built-in BLUETOOTH adaptor should be turned on. For whether or not a BLUETOOTH adaptor is incorporate, and for how to turn it on, refer to the operating instructions supplied with the computer.

When you pair the headset with a device for the first time after you bought it, or after you initialized the headset (the headset has no pairing information), press and hold the button for about 2 seconds when the headset is turned off. The headset enters pairing mode automatically. When you pair a 2nd or subsequent device (the headset has pairing information for other devices), press and hold the button for about 7 seconds.

Make sure that the indicator flashes blue and red alternately after you release the button. You hear voice guidance “BLUETOOTH pairing”. Note • If pairing is not established within about 5 minutes, pairing mode will be canceled and the headset will turn off. In this case, start over from step 1. • Once BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases: • Pairing information has been deleted after repair, etc.

• The headset is already paired with 8 devices and another device is to be paired. The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the paired device with the oldest connection time is replaced by the new one. • When the pairing information for the headset has been deleted from the BLUETOOTH device. • When the headset is initialized, all pairing information is deleted.

In this case, delete the pairing information of the headset from the BLUETOOTH device, and then pair them again. • The headset can be paired with multiple devices, but can only play music from one paired device at a time.

Hi alokatzenith, After you pair the Bluetooth headset, can you try the following: 1. Navigate to the Control Panel (large icon view) > Devices and Printers and check if you see the BT Headset in the list of devices. - If the BT headset is on the list, right click on it, navigate to Properties > Services Tab and ensure all services are checked (you may see an A2DP. Audio Sink. Or'Headset) - 2. Navigate to the Control Panel (Icon Views) > Sound and see if you can set the bluetooth headset as the default playback device. - When done, try to play a music fie and observe.